3
1-800-348-5004
11. REPLACEMENT PARTS AND ACCESSORIES.
When servicing, use only identical replacement
parts. Only use accessories intended for use with this tool. Approved replacement parts and accessories are
available.
12. STAY ALERT.
Watch what you are doing. Use common sense, do not operate any tool when you are tired.
13. STORE IDLE EQUIPMENT.
When not in use, tool should be cleaned and then stored, fully
assembled, in a dry location to reduce rust. For safety, keep out of reach of children.
14. OUTDOORS EXTENSION CORDS.
When air compressor is used outdoors, use only rounded
jackets extensions cords intended for outside use. See manufacturer's manual for the AWG required for the
compressor's amperage draw.
15. BE AWARE OF AIR HOSE AND THEIR CONNECTIONS.
Don't trip over hoses. Make sure all
connections are tight.
16. BE AWARE OF OTHER PEOPLE.
Never point the tool at people or animals.
17. USE THE CORRECT AIR CONNECTOR.
The connector on the tool must not hold pressure
when the air supply is disconnected. If the wrong fitting is used, the tool can remain charged with air after
being disconnected and still be able to drive a fastener.
Description
Air Palm Nailer
S4 Hex Key
Air Tool Oil
Operating instruction
Qty
1
1
1
1
UNPACK
Figure 1
Your air tool is fully assembly when you receive it. Before using it, attach the air line and desired air system
accessories. See Figure 1 for the recommended accessories and connection order. Be sure the air hose is
depressurized when installing or removing adapters to the air line.
WARNING:
The warning, caution, and instructions discussed in this instruction manual cannot
cover all possible conditions and situations that may occur. It must be understood by the operator that
COMMON SENSE AND CAUTION ARE FACTORS WHICH CANNOT BE BUILT INTO THIS
PRODUCT, BUT MUST BE SUPPLIED BY THE OPERATOR.
When unpacking, check to make sure that all the parts are included. If any parts are missing or broken, please
call seller Refer to the Part Lists on page 5.
SETUP
