CUT-OFF SAW SAFETY WARNINGS
4
1-800-348-5004
6. Repair or replace damaged or worn cord
immediately.
7. This tool is intended for use on a circuit
that has an outlet that looks like the one
illustrated above in 125 V~ 3-Prong Plug
and Outlet. The tool has a grounding plug
that looks like the plug illustrated above
in 125 V~ 3-Prong Plug and Outlet.
8. The outlet must be properly installed and
grounded in accordance with all codes
and ordinances.
9. Do not use an adapter to connect
this tool to a different outlet.
For Your Own Safety Read Instruction Manual Before Operating Grinder
1. Wear eye protection.
2. Use grinding wheel suitable for speed of grinder.
3. Replace cracked wheel immediately.
4. Always use guards and eye shields.
5. Do not over tighten wheel nut.
6. Use only flanges furnished with the grinder.
7. Frequently clean grinding dust from beneath grinder.
8. Wear a full face shield over ANSI approved safety goggles during use.
9. Do not grind with side of wheel unless wheel is specifically designed for that type of
grinding.
10.
DO NOT OPERATE WITH ANY GUARD DISABLED, DAMAGED, OR REMOVED.
Moving guards must move freely and close instantly.
11. The use of accessories or attachments not recommended by the manufacturer may
result in a risk of injury to persons.
12. When servicing use only identical replacement parts.
13. Only use safety equipment that has been approved by an appropriate standards
agency. Unapproved safety equipment may not provide adequate protection.
Eye protection must be ANSI-approved and breathing protection must be
NIOSH-approved for the specific hazards in the work area.
125 V~ 3-Prong Plug and Outlet
(for up to 125 V~ and up to 15 A)
Grounding
Pin
