Steel City 50125, User Manual

Page: 25 / 34

2
5
OPERATION
PRE RUN CHECK
Before you begin using your new bandsaw, you should
give it a thorough inspection and ask yourself the fol-
lowing questions:
1.Are the blade bearings properly adjusted?
2.Is the blade tension and blade tracking properly set?
3.Is the unit stable, does it rock or wobble?
4.Have you read all the warnings associated with this
saw?
BLADE GUARD HEIGHT
The blade guard height is set by loosening the thumb-
screw (A)and then push the Bracket support (B). The
guard should set no higher than 1/4” above your
workpiece during use.
Fig.23
A
B