14
MAINTENANCE
1. FREQUENT INSPECTION
The bandsaw should be inspected frequently.
The cord, in-lead, plug and switch should be inspected for good condition.
Inspect if there is any damage on the drive part.
2. CLEANING
Clean out sawdust and chips from time to time. Carefully clean the blade guard and moving parts inside the bandsaw.
3. LUBRICATION
To keep the bandsaw in top running condition and to assure maximum service life, oil or grease the moving parts and rotating
parts from time to time.
To reduce the emitted noise, always be sure that the blade is sharp and clean.
4. KEEP IN STORAGE
The bandsaw should be kept in a dry, clean and non-corrosive environment.
Always be sure the tool is switched OFF and disconnect the plug from the power supply before inspection
WARNING:
and maintenance.
