20
RIVING KNIFE/SPLITTER COMPONENTS
ASSEMBLY
N
ote
:
Remove the table insert ( Table insert are gripped
by four magnets on the table).
F
ig
.1
4
INSTALLING AND REMOVING
THE RIVING KNIFE/SPLITTER
1. Loosen the knob (C),Line up the riving knife/splitter in
the proper direction to the mounting bracket (B).
2. Push the Riving Knife/
all the way down into the
mounting bracket, make sure the location pin is
properly locked in the hole of the Riving Knife/
.
(The location hole is on the button side of the Riving
Knife/
).
3. Tighten the fasting knob(C).
1. Loosen the fasten knob (C).
2. Remove the Riving Knife/
out of mounting
bracket.
Make sure blade or arbor is at the highest
position before adding or removing the riving
Knife/
.
SEE FIG.15.
splitter
splitter
splitter
splitter
splitter
SEE FIG.1
6
NOTE:
•R
e
m
o
v
e
F
ig
.15
C
F
ig
.1
6
C
B
BLADE ASSEMBLY
F
ig
. 17
