Steel City 35920, User Manual

Page: 11 / 38

Remove any protective materials and coatings from all
of the parts and the table saw. The protective coatings
can be removed by spraying WD-40.
Check shipping carton and machine for damage before
unpackaging. Carefully remove packaging materials,
parts and machine from shipping carton. Always check
for and remove protective shipping materials around
motors and moving parts. Lay out all parts on a clean
work surface.
A) Blade Guard and Splitter Assembly
B) Mobile Base Caster Assembly
C) Miter Gauge
D) Blade Wrench
E) Blade Wrench
F) Riving Knife (2)
G) Cabinet Wheels (2)
H) Dust Port
I) Handwheel Assembly(2)
J) Handwheel Lock Knob(2)
Parts can be cleaned by spraying WD-40 on them and
wiping it off with a soft cloth. This may need redone
sever-al times before all of the protective coatings are
removed completely.
After cleaning, apply a good quality paste wax to any
unpainted surfaces. Make sure to buff out the wax
before assembly.
Compare the items to inventory figures; verify that all
items are accounted for before discarding the shipping
box.
If any parts are missing, do not attempt to plug in the
power cord and turn "ON" the machine. The machine
should only be turned "ON" after all the parts have
been obtained and installed correctly. For missing parts,
contact Steel City at 1-877-SC4-TOOL.
A
B
I
J
H
C
D
E
F
G
15