18
735.800 | 10.7
EN
8.3.2 Time diagram
;1.: Time diagram active: 1, inactive: 0
diagram_active = 1
Diagram_active is preset in the factory to 1, so the daily diagram can be
selected and displayed in the digital picture frame.
If diagram_active is set to 0, the daily diagram cannot be selected in the
digital picture frame.
8.3.3 Sensor selection for the temperature diagram
;1.3 Override bitmask inputs (T6|T5|T4|T3|T|T1) e.g. "0|0|1|1|1|1"
;diagram_bitmask_override = "0|0|1|1|1|1"
The selection of the temperature sensors which are shown in the tem-
perature diagram can be changed.
To do so, the semicolon before the phrase "diagram_bitmask_override"
must be deleted and a sensor selection must be defined as shown in
the example. The selection is defined by six characters which are each
separated by a "|". The characters may only have the value "0" or "1"; "0"
means sensor "not selected", and 1 means sensor "selected".
In the example "0|0|1|1|1|1", the sensors T1 to T4 would be selected,
while T5 and T6 would be deactivated.
If you wish to return to the standard settings, you must re-write a semi-
colon in front of the phrase "diagram_bitmask_override".
8.3.4 CO2 factor
;1.4 Override CO factor
;factor_CO = 0.3
If you wish to use another factor than 0.3 Kg/kWh to calculate the
CO value, this factor can be defined.
To do so, the semicolon in front of the phrase "factor_CO" must be
deleted and a factor defined as shown in the example. The physical unit
of the factor is kg/kWh.
If you wish to return to the standard settings, you must re-write a semi-
colon in front of the phrase "factor_CO".
8.3.5 Diagram title
;1.5: Diagram title (50 characters)
diagram_title = ""
You can specify a title for the temperature diagram which is shown
above the temperature curves. The diagram title is limited to a maxi-
mum of 50 characters.
In the factory, the diagram_title is set to "", i.e. no title is defined.
The title is defined by entering characters within the quotations marks,
e.g. diagram_title = "My solar energy system"
Summary of Contents for TK RW-2
Page 27: ...27 735 800 10 27 EN 14 Notes ...
Page 28: ...735800 ...
