Steba FH 504, Instructions For Use Manual

Page: 9 / 22

9
∙ Do not use this heater close to showers, baths, swimming pools.
∙ The appliance must be positioned so that the plug is always
accessible and not to be hot blown on.
Safe positioning
∙ The appliance must be used only on a flat, stable surface.
∙ The fan heater only operates when the safety switch on the
bottom of the unit is pressed.
∙ The appliance must be not accessible for persons who are ta-
king a bath or in the shower.
∙ Do not place the cable under a carpet.
∙ Mind that during function the cordset must be always com-
pletely pulled out.
Maintenance
This fan heater does not require any particular maintenance.
We only recommend to clean at least twice a year the air inlet
and air outlet grille with a vacuum cleaner to remove dust from
motor and heating element.
Use of the heater
∙ OFF
∙ Coolair
∙ I: 1000 W
∙ II: 2000 W
Use of the thermostat
∙ In a room where the temperature is too high (more than 30°C), it is normal that the
thermostat will not switch on the heater.
∙ In a room where the temperature is too low (around 5°C or even less) it is also
normal that the thermostat will keep the appliance working until the temperature
gets higher.
∙ To select the right thermostat position we suggest you to
∙ turn the thermostat in maximum position (clockwise);
∙ leave the appliance working until the comfortable temperature is reached;
∙ turn the knob anti clockwise until you hear a „click“ and the red indication light
turns off;