12
13
PRODUCT
DESCRIPTION
1. Food
pusher
2. Fruit
plate
3. Juicer cover with chute
4. Sieve
assembly
5. Sieve
base
6. Spout
7. Motor
connector
8. Motor
base
9. Power
switch
10. Safety locking handle
11. Pulp container
ASSEMBLING INSTRUCTIONS
1. Place sieve base on top of the motor base
2. Place the sieve assembly inside the sieve base and aligning the ▲
making on the sieve assembly and connector. Then press the sieve
assembly downwards to the connector until hear “click”. Be sure the
sieve assembly is properly installation when switching the appliance
on. Beware of the small cutting blades at the base of sieve.
3. Place the juicer cover over the sieve base, positioning the feed chute
over the stainless steel sieve and lower into position.
4. Raise the safety locking handle up into the vertical position. Locate
the locking handle into the two holes on both sides of the juicer
cover.
5. Slide the food pusher down the feed chute by aligning the groove in
the food pusher with the small protrusion on the inside of the top of
the feed chute.
6. Place the pulp container into position by tilting the pulp container
slightly.
Hint:
For easy cleaning, place a small plastic bag into the
pulp container to collect the pulp. The bag may also prevent pulp
from spitting out of the pulp container.
7. Place a jug or glass under the spout on the right hand side of the
juice extractor.
OPERATING INSTRUCTIONS
1. Unpack and remove all packaging materials from carton.
2. When the appliance is used for the fi rst time, it is normal for the
motor to give off a small amount of smoke and odor.
3. Always make sure the appliance is properly & completely
assembled before operating.
4. Wash the fruit or vegetables ready for juicing. Most fruit and
vegetables such as apples, carrots and cucumbers will not need
to be cut to size as these will fi t into the feed chute. When juicing
carrots, place the tip of the carrot in last.
5. Ensure to place a large jug or glass under the spout while juicing.
6. Plug the power cord into a 220-240V ~50HZ power outlet and turn
the power to “1” position to start operating.
7. With the motor running, place food down the feed chute. Using the
food pusher, gently guide food down the feed chute.
Note:
a) To extract the maximum mount of juice, always push the food
pusher, slowly.
b) Never use hands or foreign objects to push food down the feed
chute or to clear the feed chute. Always use the food pusher
provided.
c) Do not continuous operate this machine more than 10 minutes.
8. Juice will fl ow into the jug/glass and the separated pulp will
accumulate in the pulp container.
Note:
a) Do not allow the pulp container to overfi ll as this may damage
the unit.
b) Please switch off the appliance when empty the pulp container.
c) For easy cleaning, suggest place a plastic bag into the pulp
container to collect pulp.
CAUTIONS
1 Before operation, always make sure the sieve assembly as well as
other accessories are properly & completely placed.
2 The appliance is designed for extracting fruit or vegetables only.
Do not use for blending, chopping, mincing, pureeing, slicing or
shredding of any meat, nut, fruit or vegetable.
480-12935 - E 10 - Vita Juicer.indd 12-13
480-12935 - E 10 - Vita Juicer.indd 12-13
25.07.2005 08:17:55
25.07.2005 08:17:55
