manualshive.com logo in svg

Stearns 1339, Owner'S Manual

The Stearns 1339 Owner's Manual is a comprehensive guide that provides detailed instructions and essential information for operating and maintaining the Stearns 1339 product. This manual is available for free download on manualshive.com, allowing users to easily access the essential resources they need to optimize their product experience.

Share
Download
background image

5

III.

INSTRUCTIONS FOR USE

SPECIFICATIONS:

Chest  Size

:  30 – 52 inches (76 - 132 cm)

Weight Range:  

more than 90 pounds (40 kg)

Age Range

:  16 years of age and older

Buoyancy (minimum)

:  33.7 Pounds (150 Newtons) when fully inflated

Inflation  System

:

Manual/Automatic Inflation Mechanism

 (located on your right side)

Oral Tube

 (located on your left side)

Pull  Tab

  (located  on  your  right  side)  used  to  manually  activate  the

inflation mechanism and inflate the PFD.

CO

2

  Cylinder

:   33  gram,  1/2  inch  thread  as  provided  in  Replacement  Kit

0920 and 0923

Indicators:

   There  are  three  indicators:   A,  B,  and  C  on  the  inflation

mechanism.  For the PFD to be fully  armed all  three  indicators  must  be

green and the CO

2

  cylinder condition checked.

PRE-DONNING INSTRUCTIONS

CHECK THE FOLLOWING BEFORE EACH USE OR OUTING:

1.  INSPECT PFD FOR DAMAGE

2.  EXAMINE THE THREE INFLATION MECHANISM STATUS

INDICATORS

3.  EXAMINE CO

2

 CYLINDER CAP FOR PUNCTURE HOLE.

IF PUNCTURED OR DEFORMED,  REPLACE THE CYLINDER.

READ BELOW FOR MORE DETAILED INFORMATION!

1. Inspecting Your  PFD For Damage

Make  sure  that  the  PFD  is  free  from  rips,  tears  or  punctures.  This

type of damage on the  outside  covering  indicates  that  the

 

Inflatable

Chamber

 may have been  exposed  to  potentially  damaging elements.

If  these  defects  expose  the  yellow  inflatable  chamber  material,

discontinue use of  the  PFD until  you  have  the  PFD inspected  by  an

authorized repair facility.   If  these  defects  are  noticed  but  the  yellow

inflatable  chamber  material  is 

not

  exposed,  the 

Inflatable  Chamber

should  be  checked  for  leaks.   The

  Inflatable  Chamber

  should  also

be  checked  for  leaks  at  the  beginning  of  each  season  and  at  least

every  two  months  during  the  boating  season.   The  leak  test

procedure is  described  under 

USER'S INSPECTION.  

(Refer  to  page

11.)

2. Where and How to Check the Pill (Water Sensing Element)

Examine  the  inflation  mechanism  status  indicators.    The  Inflation

Mechanism Status Indicators will tell you if the inflation  mechanism  is

properly 

ARMED/REARMED

 and ready for activation.

Summary of Contents for 1339























Reviews:

No comments

Related manuals for 1339

Brands by name

Popular brands

Load more brands