SteamSpa
PHONE: 800-856-0172 FAX: 866-560-1060 http://steamspa.com [email protected]
Page 21
INST
ALLA
TION & USER GUIDE
⑤
The system will automatically drain the generator 30 minutes after the last use for 5 minutes.
⑥
The system can be manually drained by holding the key after the system has been turned
on but steam generation has not started. Holding the key again or starting up the steam will
stop the drainage process. The drainage process will automatically stop when all water is gone.
5.CHANGE BETWEEN FAHRENHEIT & CELSIUS
Selection "F/C" function bar on the setting interface shown in fig.6 after power on,
press OK key to enter the interface shown in Figure 9. Press the "OK" key again to
shift between degrees Celsius and Fahrenheit.
6
.
RESTORE
FACTORY
SETTINGS
FUNCTION
Select "Factory Setting" bar on the setting interface, and press the "OK" key shortly to
restore the factory parameter. The steam control temperature will return to 110
℉
and
the steaming time to 30 minutes.
7.SET REAL-TIME CLOCK
Select the "Real Time" function through setting interface shown in Figure 6 after
power on, and press OK key to enter the interface shown in Figure 8. Move the cursor
to the parameters need to be set by pressing key, e.g.: Hour, minute, date,
month, year, displaying time or not after power off etc. Then adjust the parameters by
pressing key. The parameter of "week" will be calculated automatically by date
input system. Press the "OK" key to save the parameters set. Exit the interface by
pressing "ESC" key. The parameters won't be saved if the "OK" key is not pressed
before pressing "ESC" key.
Remarks: The real-time clock shall be recalibrated after they power interruption of the
system is more than one week.
8.BLUETOOTH MUSIC FUNCTION
（
1
）
Starting up Bluetooth: Connect your phone or other device to the control panel
after power on, select the interface as shown in Figure 3 and press
key to power
on/off the bluetooth music function. The key state prompts under play mode are shown
as
.
（
2
）
Song switching: When the bluetooth music is playing: It can be switched to the
previous song by pressing key and the next song by pressing
key.
（
3
）
Volume adjustment: The music volume can be adjusted by pressing
key
on the interface of bluetooth. The volume range (0-15) e.g. "10dB" may be shown on
the screen. ll be recalibrated after they power interruption of the system is more than
one week.