Specifications
Features
5-year parts warranty - 2-year labor warranty
Generator typically can be installed up to 25 ft. from the
bathing area
Diagnostic LED Displays
Stainless Steel Construction
Solid-State Circuitry
Codes/Standards
UL 499
UL/CUL Listed
Required Equipment
TSC Control
Required Electrical Service
Dedicated circuit required: See Specification Chart for proper
electrical requirements
Product Information
Water Supply -
⅜
" Compression Fitting
Steam Line - ¾" Brass BPT male thread
Pressure Relief Valve - ¾" NPT female thread
Drain Line - Capped ½" Brass NPT male thread
Generator
Weight - 40 lbs.
Installation Notes
Steam Generators can be typically mounted within 25 ft. of
the bathing area.
Steam Generators should be accessible for service.
Do not install in attic.
Do not install generators outside, in a moist, humid area or
in an area where parts may freeze or corrode.
Steamhead to be mounted 18" above floor or 6" above rim
of tub and as far from the seating area as possible.
Rough-in Notes
Access: 28" L x 18" W x 20" H (35" L with Auto Drain)
02/09
Pub. No. 213-A
Steam Generator
TSG-10
Model: TSG-10
- 1 -
*Refer to sizing guidelines to accurately determine the proper size generator for the installation.
Steam Generator Specification Chart
10
375
240/1/42
208/1/48
6
6
60
60
Model
Number
Product
Number
KW
Rating
Max. Cu. Ft.
Range*
Volts/Phase/
Max. Amps
Wire Size 90°C
Copper AWG
Line
Fuse
17½" x 6½" x
15½"
Dimensions
L x W x H
TSG-10
1020
1021
®
