Modular Jack
Protective
Covering
(Remove)
Multi-Conductor
Control Cable
(25 feet)
Black Plastic
Strain Relief
Clamp
Ground
Connection
Electrical
Supply Wire
208/240V
L1 & L2 Power
Connections
Steam Outlet
Safety Valve
Optional Steamist
Splitter for Two
Controls
Plug
®
Optional Auto
Drain Connection
Terminal Strip
for Auto Drain
Connection
½" Outlet
When not equipped
with Optional Auto
Drain this line should
remain capped
Test Switch
The proper size Steam Generator has been selected by
using the sizing page in the “Full Line Brochure,” “Pricing
Guide,” or “The Generator Sizing Guide” in the Residen-
tial Systems/Steambath Product Information section of
the Steamist web site - www.steamist.com.
CAUTION: An improperly sized Steam Generator will
NOT produce the amount of steam necessary to reach
selected temperature.
The proper voltage Steam Generator has been selected
(i.e., 208V or 240V). A 208V Generator operating on
240V will damage the heating element, and a 240V
Generator operating on 208V will result in a 25%
loss of power.
The Steam Generator is installed in an upright position.
The proper sized 90°C wire and circuit breaker have
been used.
The circuit breaker is NOT a GFI (Ground Fault
Interrupter) type.
The Steam Generator is properly grounded.
The circuit breaker or disconnect switch is on.
Water supply is open to the Steam Generator.
Electrical Installation Instructions
Checklist
Models: SM-5, SM-7 and SM-9
Figure 2 - Internal Electrical Connections
06/10
Before starting, insure that the conditions of the following checklist have been met:
Pub. No. 280-A
- 2 -
