8
Assembling Your
Sidekick™ Steam Cleaner
WARNING: Do not try to connect accessories while unit is emitting steam.
FABRIC NOZZLE
1.
Align rear end of Fabric Nozzle with Steam Nozzle. Rectangular hole in selected accessory
should align with blue lock/release buttonon Steam Nozzle.
2.
Press down on blue lock/release button (FIGURE 5-A). While continuing to hold button down,
slide Fabric Nozzle onto Steam Nozzle (FIGURE 5-B). Push Fabric Nozzle over button, and
continue pushing until button snaps through rectangular hole.
SHOULDER STRAP
1.
Grasp clasp on one end of Shoulder Strap. Press lever down to open clasp, and continue to
hold open (FIGURE 6-A).
2.
Thread clasp through one of the strap bases (it does not matter which one), then release
lever to close clasp (FIGURE 6-B).
3.
Repeat STEPS 1 & 2, this time connecting clasp on opposite end of Shoulder Strap to the
remaining strap base.
FIGURE 5
FIGURE 6
5-A
5-B
6-A
6-B
