8 | ENGLISH
IMPORTANT: By default, the Voltage Selector is set to the 100-
127V setting. Be sure to select the correct voltage for your
location before plugging power cord into an electrical outlet.
To change the voltage setting:
NOTE: These steps assume that Voltage Selector is still set to
100-127V default.
1.
Locate Voltage Selector, recessed inside slot at rear of Main
Body.
2.
Find a tool with a fine tip - a pen is ideal.
3.
Carefully insert tip of pen into white notch. Slide Voltage
Selector to the right, towards 220-240V label.
IMPORTANT: Be
sure that Voltage
Selector is moved
as far to the right
as possible for
voltage setting
to take effect
correctly. Voltage
Selector should
appear as shown.
100-127V
220-240V
100-127V
220-240V
100-127V
220-240V
A
B
C
NOTCH
FIGURE 1