6 | ENGLISH
TELESCOPIC POLE
The Telescopic Pole is made up of four sections (FIGURE 1):
•
TOP (SECTION 1)
•
MIDDLE-TOP (SECTION 2)
•
MIDDLE-BOTTOM (SECTION 3)
•
BOTTOM (SECTION 4)
SECTIONS 1, 2 & 3 are adjustable in length. By using the three extension locks, these
sections may be extended or retracted in order to achieve the desired length. Refer to
Adjusting
Telescopic Pole
section on Page 7 for more details.
NOTE: SECTION 4 (BOTTOM) is the widest section of the Telescopic Pole. This is the
section that fits into the Pole Base.
CONNECTING TELESCOPIC POLE
1.
Make sure Pole Base coupling is loosened – rotate it
counter-clockwise if necessary.
2.
Look down inside Pole Base, and locate two guide ridges
(FIGURE 2-A). Align guide grooves on Telescopic Pole
(FIGURE 2-B) with guide ridges inside Pole Base.
3.
With guide grooves aligned with guide ridges, insert
SECTION 4 of Telescopic Pole into Pole Base (FIGURE
2-C).
NOTE: If you have trouble locating two guide ridges
inside Pole Base, insert SECTION 4 of Telescopic Pole
into Pole Base, then twist pole to properly align the
guide grooves and guide ridges.
4.
Screw coupling clockwise to lock Telescopic Pole in place
(FIGURE 2-D). Telescopic Pole should now be secured to
the Pole Base.
Assembling Your
Full Size Fabric Steamer
FIGURE 1
FIGURE 2
2-A
2-B
2-C
2-D
