10 | ENGLISH
STEAM CLEANING ACCESSORIES
WARNING: Do not connect accessories while unit is emitting steam.
JET NOZZLE / SCRAPER / SQUEEGEE
1.
Select one of the three accessories (Jet Nozzle shown as example) and push onto the Steam
Nozzle (A).
2.
Rotate accessory until the green lock/release button snaps into the accessory hole (B).
NOTE: The Jet Nozzle, Scraper, Squeegee can be connected to the end of an Extension
Wand for reaching high or difficult spots. Connect the Extension Wand (or Wands), then
connect your desired accessory to the Wand in the same way as you would normally
connect to the Steam Nozzle.
UTILITY BRUSHES / ANGLED NOZZLE / SCRUB PAD
NOTE: Accessories connect to the Jet Nozzle, not the Steam Nozzle.
1.
Firmly press accessory onto tip of Jet Nozzle. Press it on as far as possible to prevent steam
leakage (See figure 3).
2.
To remove accessory, simply grip it firmly and pull it off Jet Nozzle.
FIGURE 3
Steam Nozzle
B
A
