10 | ENGLISH
RECOMMENDED FLOOR SURFACES
Below is a listing of some of the most common floor surfaces that the Steam Mop is ideal for
cleaning. If you have a question about a floor surface that isn’t listed below, please contact our
Consumer Service Department:
or
1-800-711-6617
.
The Steam Mop is perfect for these floor surfaces:
•
Sealed Hardwood
•
Stained Concrete
•
Sealed Laminate
•
Linoleum
•
Ceramic
•
Granite
•
Marble
•
Slate
•
Vinyl
•
Carpeting / Rugs (using Carpet Glider accessory)
IMPORTANT: Do not use on unsealed hardwood or unglazed ceramic surfaces. Surfaces
that are not properly sealed may be warped or damaged by exposure to heat and moisture.
Care should also be taken when steaming sealed hardwood floors, as prolonged exposure
to steam in a single spot may cause damage and discoloration. To avoid this, keep the
Steam Mop in constant motion on these surfaces, and place it back on Resting Pad when
idle.
Steam may remove the sheen from some floors that have been treated with wax.
Extremely rough textured floors may tear or damage Microfiber Pads.
Before steaming any carpeting, it is recommended to consult the manufacturer’s guidelines.
For carpets in question, always test on a small inconspicuous area before proceeding.
Using Your
Steam Mop
