74
www.steamax.com
STEAMAX TFV8 BIG BABY – COMMISSIONING OF THE DEVICE
Vaping
Adjusting the Air Supply
Changing the Mouthpiece
While holding the fire button of your e-cigarette, inhale the vapor slowly and continuously through the
mouthpiece of your clearomizer. Release the fire button while exhaling the vapor.
There is a airflow control ring located on the head base of the device. It can be adjusted by slightly turning
and is adaptable to your vapor preferences. The more air flows through the device (the more the slots are
open), the lower is the drawing resistance. Pay particular attention to a sufficient air supply during sub-ohm
vaping.
The mouthpiece is placed on the top cap of the Clearomizer. It can be removed by gently pulling up and once
again attached by applying gentle pressure on clearomizer. The mouthpiece may be cleaned with warm water.
Make sure that it is completely dry before reinserting into the clearomizer.
