16
Q-Logic™ Joystick Setup
15.0
Joystick Calibration
1.
Plug the Q-Logic handheld programmer into the back of the display.
2.
On the programmer, select
Program Adjustments.
3.
In the Program Adjustments menu, select
Enhanced Display.
4.
In the Enhanced Display menu, with the
Up and Down
buttons, select
Proportional Input.
5.
With the
Right
navigation button,
select
Proportional Calibration.
The programmer will
read ‘
Roll the joystick in two full circles.’
Select
OK
and verify that calibration was successful.
6.
With the
Left
navigation button,
select back until you exit completely. Unplug the
programmer and cycle power the chair.
Joystick Throw
1.
Plug the Q-Logic handheld programmer into the back of the display.
2.
On the programmer, select
Program Adjustments.
3.
In the Program Adjustments menu, select
Enhanced Display
.
4.
In the Enhanced Display menu, with the
Up and Down
buttons,
select
Proportional Input.
5.
In the Proportional Input folder, select
Proportional Throw.
Follow the prompts on the
programmer.
Assign Direction
1.
Plug the Q-Logic handheld programmer into the back of the display.
2.
On the programmer, select
Program Adjustments.
3.
In the Program Adjustments menu, select
Enhanced Display.
4.
In the Enhanced Display menu, with the
Up and Down
buttons, select
Proportional Input.
5.
In the Proportional Input folder, select
Proportional Assign Directions.
Follow the prompts
on the programmer.
Summary of Contents for IDM-ALLROUND-9
Page 51: ...a Notes 25 0...
