Stealth Scooters Rogue 1600 Turbo Edition, Owner'S Manual

Page: 9 / 14

RIDING
Make sure that all of the exposed bolts and screws are tightened.
Raise the kickstand to its upright position.
Insert the key into the ignition and turn it towards the right. The battery in-
dication lights will turn on. If you would like to turn the Front and back
lights on, click the key again to the right.
Put one foot on the deck of the Rogue 1600W while pushing off with the
other foot, gently rotate the THROTTLE GRIP, on the right side of the
handlebars. The scooter will begin to move on its own power.
**Your scooter has a variable speed hand throttle. You can control the
speed of your scooter by the amount of pressure you use when rotating the
hand throttle. The more you rotate, the faster you will go.
STOPPING & BRAKING
To brake, release the THROTTLE GRIP and depress the BRAKE LEVERS (on
the left/right side of the handlebars. Depressing
the brake will disengage power to the motor. When the unit feels like it is
losing power or not accelerating to full speed, the scooter is ready to be
re-charged or until the battery indicator shows empty.
NOTE: If the on/off switch is left in the ON position for more than 10-15
minutes without moving, Smart Power will shut itself OFF. To reset, turn
the unit OFF, wait a few seconds and then switch it back ON again.
How to …