Maintenance
The chain will come adjusted from the factory. However, it may be neces-
sary to adjust the chain from time to time. The chain must be well aligned
onto the sprockets in order to avoid uneven wear. This will result in short-
ened chain and sprocket life.
How tight should the chain be?
If the chain is skipping or jumping on the sprocket, this is too
loose and may be harmful.
If the chain is making a humming sound when the wheel is turn-
ing, this is too tight and may cause the chain to snap.
The correct tension is achieved by adjusting the chain from its
loose position to when it becomes lightly tense.
To tighten the chains:
Slightly loosen the two axle bolts on
both sides of the rear wheel. (Fig.14).
Then slowly adjust the two adjusting
screws on each side of the rear tire
(Fig.15) until the chain reaches the
proper tension.
Rotate the rear wheel to make sure
the chain is aligned.
Finally, lock and tighten the rear axle
bolts prior to riding.
Summary of Contents for Rogue 1600 Turbo Edition
Page 1: ...Owners Manual Rogue 1600...
Page 14: ...Www stealthscooters com au...
