Stealth Cam STC-U840IRS1, Instruction Manual

Page: 27 / 42

WWW.STEALTHCAM.COM
Toll Free 877-269-8490
27
USING THE CAMERA IN PIR DETECTION MODE
•
Mount the camera to the tree or other sturdy object using either a tree
screw (optional accessory) or supplied mounting strap.
•
Open the front housing and move the switch to either one of the Preset
modes or Manual mode. At this point, you have 30 seconds to make any
mode selection changes before camera is ready to use.
•
If you chose Manual mode then make sure your camera is in the PIR
mode and not Time Lapse (tLS). If your not sure, please follow the
“
Setting the Camera’s Operation Mode” above to set the camera into
the proper mode.
To Capture Images, make sure display reads CAMERA:
•
Once in Manual mode, if the display does not read CAMERA then,
Ø Press the [MENU] button once.
Ø Press the [OK] button once.
Ø The word CAMERA will blink.
Ø
Press the [UP] button ONE time to toggle to Camera mode.
Ø Press the [OK] button TWO times.
Ø Press the [MENU] button once to exit.
To Capture Videos, make sure display reads VIDEO:
•
Once in Manual mode, if display does not read VIDEO then,
Ø Press the [MENU] button once.
Ø Press the [OK] button once.
Ø
The word CAMERA will blink.