Stealth Cam STC-RX24, Instruction Manual

Page: 16 / 54

www.stealthcam.com Page
877-­‐269-­‐8490
16
CAMERA PROGRAMMING -­‐ CUSTOM (CONT)
Ø
CAMERA NAME – STEALTH CAM (default): This setting is used to identify the camera on the
Info Bar. It can be up to 13 characters long in the form of alpha (A-­‐Z), numeric (0-­‐9), or
spaces. With this option blinking, use the UP or DOWN arrow buttons to change the initial
character. Once the blinking character has been changed, use the RIGHT arrow button to
continue to the next character. Repeat until the desired name is entered. When finished
press the ENTER button again to confirm and store the new camera name. Pressing the
DOWN arrow key will move the display to the next configuration option.
Ø
TEMPERATURE – FAHRENHEIT (default): This setting is used to tell camera if the
temperature reading on the Info Bar should be in Fahrenheit or Celsius. With this option
blinking, pressing the UP or DOWN arrow buttons will cause the camera to cycle between
the two options.
Ø
FACTORY RESET – NO (default): This setting is used to reset the camera to its factory
defaults. With this option blinking, pressing the UP or DOWN arrow buttons will cause the
camera to cycle between the two options of NO or YES. When the YES option is chosen and
the ENTER button is press the camera will default all configurations made up to this point.
Ø
SECURITY KEY – OFF (default): This setting allows the owner of the camera to program a
four (4) character alphanumeric code to keep unauthorized people from accessing their
camera settings. To turn this feature on press the ENTER button, then press the UP or
DOWN arrow buttons to change to the YES option. Once chosen, press the ENTER button
and the camera will now engage this feature. Pressing the DOWN arrow key will move to
the security key configuration.