8
Use the 3mm Allen wrench
to tighten both screws evenly
until snug. The ring should spin
freely on inner clamp.
TIP: if ring doesn’t spin freely,
loosen the four INNER CLAMP
screws slightly, and re-tighten
starting at the bottom.
Attaching the gimbal handle
Attach the gimbal handle with
yoke to the outer clamp ring
using two thumbscrews.
It fits either side up.
Do not use tools on these, just
snug them tight by hand.
x2
Summary of Contents for Steadimate-S
Page 1: ...Steadicam Steadimate S LIT 900000 RevA...
Page 24: ......
