4
Before you install
Adding the Steadimate-S components to your handheld stabilizer
is a technical job, but if you can balance a 3-axis gimbal, you can
do this! We’ll add a weight base below the handle, then attach the
Steadimate-S gimbal above the handle, and finally balance the
complete system. It requires a flat-head screwdriver, the included
3mm Allen wrench, and a little patience.
To view the companion install video, visit:
Build, balance and test your stabilizer before adding the Steadimate-S
parts. Make sure you include everything necessary for the camera and
stabilizer; the batteries, memory cards, monitor or microphone.
Building Steadimate-S
TIP: to protect your
camera, mark the
position of the camera
plate, and remove the
camera while installing
the Steadimate-S.
Summary of Contents for Steadimate-S
Page 1: ...Steadicam Steadimate S LIT 900000 RevA...
Page 24: ......
