8
Installing the wall plates (concrete/brick wall)
Use the mounting template (E) to mark the installation holes. Use a level to ensure the plates are level.
Use 1/4 in (6mm) drill bit to drill a pilot holes and then use a 3/8 in (10 mm) masonry drill bit to slowly drill
2.4 in (60 mm) holes.
Use (AA) Nylon anchors, lag bolt (CC) and (BB) washer to mount the wall plates (A) to the wall.
E
AA
A
BB CC
2
1
3
4
6
(10 mm) 3/8”
(6 mm) 1/4”
(60 mm) 2.4”
