7 Maintenance
30 / 33
Mobile cutting ring pre-assembly machine
www.stauff.com
7 Maintenance
7.1 Safety
WARNING
Inappropriate corrective maintenance
Serious injuries or machine damage
► Cleaning and corrective maintenance only with the machine switched
off.
► Non non-authorised work on the machine.
7.2 Inspection and maintenance work
The mobile cutting ring pre-assembly machine is largely maintenance-free
and on being properly handled retains its functionality across the entire life
cycle. However, the following jobs should be regularly carried out:
• Before use, examine the machine for any external damage
• Check LED displays
• Clean the machine after use
7.3 Cleaning the machine
The machine and its components have to be cleaned after each use.
u
How to clean the machine:
1. Use a cotton cloth to clean the surfaces.
2. Employ water with a grease-dissolving, non-caustic cleaning agent.
Do not allow any moisture to get into the cylinders.
3. Remove stubborn dirt with a suitable cleaning agent.
4. Apply corrosion protection to metallic component parts.
Corrosion protection
Apply a light oil film as corrosion protection to the moving
machine parts after removing any stubborn dirt with a cleaning
agent and after a lengthy stoppage.
