27
EN
Glue a servo frame to the servo hole.
33
ARF VERSION ONLY
After bringing the servo to neutral position,
mount the servo horn which you can find in the
acessory bag. Drill the second hole with a 1,6
mm drill.
34
Create a linkage like shown in the picture. The
inital length should be around 66 mm.
35
Connect the linkage to the servo horn (second
hole). Bring the servo to a 45° position. The flap
should be completely in neutral position now.
Push the linkage through the wing and push the
servo into the frame. Adjust the linkage so that
the flap is completely retracted.
36
Summary of Contents for EPSILON COMPETITION V3
Page 31: ...31 EN...
Page 44: ...www horizonhobby eu...
