26
EN
Glue a servo frame to the servo hole.
29
Create a linkage like shown in the picture. The
inital length should be around 68 mm.
Bring the aileron servo to middle position with a
servo tester and mount the servo horn. Drill the
outer hole with a 1,6 mm drill.
30
31
Connect the linkage to the servo and aileron
horn. Adjust the length if necessary. Screw the
latch to the servo frame to tighten the servo.
32
ARF VERSION ONLY
ARF VERSION ONLY
Summary of Contents for EPSILON COMPETITION V3
Page 31: ...31 EN...
Page 44: ...www horizonhobby eu...
