4
Manual Aiolos
Manual Aiolos
The Fuselage
Prepare for the first step two cable con-
nectors from MPX and Servo and isolate
them with heat shrink tube as shown on
the left.
Cable lenght:
Male servo connector --> Flaps: 41cm
Male servo connector --> Aileron: 90cm
Female servo connector --> Receiver
40cm (2x)
Solder the MPX pins to your decision but
it would be recommend to follow a com-
mon scheme.
Lighty sand the MPX female
connector and glue it in the
fuselage. Due to the fusela-
ge design this step could be
a bit tricky. A good solution
is to fill in thick epoxy from
the opposite site of the fu-
selage. Please pay attention
that no glue drops into the
connector.
Summary of Contents for Aiolos HSF0314083
Page 1: ...Manual Aiolos HSF0314083 HSF0314083E...
Page 20: ......
