Status DP1051, Original Instructions Manual

Page: 5 / 40

5
SPECIFIC SAFETY INSTRUCTIONS
EN
• Use the power tool, accessories and tool bits etc. in accordance with these
instructions, taking into account the working conditions and the work to be
performed. Use of the power tool for op-erations different from those intended could
result in a hazardous situation.
SERVICE
• Have your power tool serviced by a qualified repair person using only identical
replacement parts. This will ensure that the safety of the power tool is maintained.
• Wear ear protectors with impact drills. Exposure to noise can cause hearing
loss.
• Use the auxiliary handle supplied with the machine. Loss of control can cause
personal injury.
• During operation provide eye protection to prevent eyes from exposure to
flying particles. Wear goggles.
• Take protective measures against inhalation of dust. Some materials can
contain toxic ingredients. Wear a dust mask and work with dust/chip
extraction when connectable.
• Hold the power tool by insulated gripping surfaces only, when performing an
operation where the cutting accessory may contact hidden wiring or its own cord.
Cutting accessory contacting a “live” wire may make exposed metal parts of the power
tool “live” and could give the operator an electric shock.
• Do not process materials containing asbestos. Asbestos is considered carcinogenic.
• WARNING : Before connecting a tool to a power source be sure that the voltage supply
is the same as that specified on the nameplate of the tool.
• A power source with a voltage greater than that specified for the tool can result in
serious injury to the user, as well as damage to the tool.
• If in doubt, do not plug in the tool.
• Using a power source with a voltage less than the nameplate rating is harmful to the
motor.
• Fully unwind cable drum extensions to avoid potential overheating.
• When an extension cable is required, you must ensure that it has the right ampere
rating for your power tool and it is in safe electrical condition.
• WARNING : Always switch off and unplug the power tool prior to any adjustment,
servicing or maintenance.
• While operating the machine, always hold it firmly with both hands and provide for a
secure stance. The power tool is guided more securely with both hands.
SPECIFIC SAFETY INSTRUCTIONS