Status BVP300, User Manual

Page: 4 / 12

4
1.3. MAINTENANCE AND CLEANING
a.) Before cleaning, unplug the adapter.
b.) Store the adapter with charging
base and the device in a dry and
ventilated place.
c.) Use a soft, dry or slightly damp soft
cloth to clean the device and char-
ging base. Do not use sponges,
coarse cloth, polishing agents, di-
sinfectants, or aggressive cleaning
agents that may damage the surface
of individual components. Never
immerse the device in water or put
it under running water. Never spray
cleaning agents directly on the insi-
de or outside of the device.
d.) The device must be completely dry
before use.
e.) If liquid enters the interior of
the device, consult the seller or
authorised repair service.
1.4. REPAIR SERVICE
a.) Only qualified and authorised
personnel may perform repairs.
b.) Only experts that can assess the
task at hand and related risks,
based on their technical education
and knowledge of appropriate
standards, can perform repairs.
c.) Troubleshooting is performed by
the manufacturer or an authorised
representative.
d.) If possible, components that need
to be replaced are replaced with
the original or functionally identical
replacement spare parts.
j.) Store the device in dry and aerated
space, far from fire or high tempera­
ture. It is recommended to keep it
at room temperature and approxi-
mately half charged. In case of disuse
up to one year, the device should be
stored on temperature from 0 °C to
30 °C, in case of disuse longer than
a year it is recommended to sto-
re it at temperature from 10 °C to
25 °C. The disuse up to a year or
more causes overly discharging the
battery. That is why it is recommen-
ded to charge and empty the device
every three months and later
keeping the battery approximately
half charged.
When correctly connected and used
in accordance with the instructions,
the device is not dangerous. Electrical
components use low voltage and are
protected against dust.
Read the instructions for use
thoroughly before use.
The instructions for use should be
stored next to the device and always
available during use. Opening the devi-
ce and accessing its interior by a user is
forbidden. The manufacturer assumes
no liability for damage caused by incorr-
ect use or by failure to comply with the
instructions.