Information
Solutions Strategies and Innovations
Static Solutions Inc.
Static Solutions Inc. - Ohm - Stat RT - 1000 Information
19
ANSI/ESD Association Standard
S2020-1999
ESD Associato
i n Standard for the
Development of an Electrostatic Discharge
Control Program for
PROTECTION OF ELECTR
ICAL
AND ELECTRONIC PARTS
,
ASSEMBLIES AND EQUIP
MENT
(EXCLUDING ELECTRICA
LLY INITIATED
EXPLOSIVE DEVICES)
1. PURPOSE
The purpose of this Standard is to provide
administrative and technical requirements, as well as
guidance for establishing, implementing and
maintaining an ESD Control Program (here after
referred to as the
“Program”)
.
2. SCOPE
This document applies to activities that:
manufacture, process, assemble, install, package,
label, service, test, inspect or otherwise handle
electrical or electronic parts, assemblies and
equipment susceptible to damage by electrostatic
discharges greater than or equal to 100 volts Human
Body Model. This document does not apply to
electrically initiated explosive devices, flammable
liquids and powders.
3. REFERENCED PUBLICATIONS
Unless otherwise specified, the following documents
of the latest issue, revision or amendment, form a
part of this standard to the extent specified herein.
EOS/ESD ADV 1.0 EOS/ESD Association Glossary
of Terms
1
ESD S1.1 ESD Association Standard Test Method
for the Protection of Electrostatic Discharge
Susceptible Items - Wrist Straps
1
ESD ADV 2.0 ESD Association Advisory for the
Protection of Electrostatic Discharge Susceptible
Items
– Handbook
1
ESD STM 2.1 ESD Association Standard Test
Method for the Protection of Electrostatic Discharge
Susceptible Items
– Garments
1
1
ESD Association, 7900 Turin Road, Bldg 3, Ste 2,
Rome, NY 13440-2069, 315-339-6937
ANSI EOS/ESD S 3.1 EOS/ESD Association
Standard for the Protection of Electrostatic
Discharge Susceptible Items - Ionization
1
ESD S 4.1 ESD Association Standard Test Method
for the Protection of Electrostatic Discharge
Susceptible Items - Worksurfaces - Resistive
Characterization
1
ESD STM 4.2 ESD Association Standard Test
Method for the Protection of Electrostatic Discharge
Susceptible Items - Worksurfaces - Charge
Dissipation Characteristics
1
ESD STM 5.1 ESD Association Standard for
Electrostatic Discharge (ESD) Sensitivity Testing -
Human Body Model (HBM) Component Level
1
ESD STM 5.2 ESD Association Standard for
Electrostatic Discharge (ESD) Sensitivity Testing -
Machine Model (MM) Component Level
1
ESD DS 5.3.1 ESD Association Standard for
Electrostatic Discharge (ESD) Sensitivity Testing -
Charged Device Model (CDM) Component Level
1
ANSI EOS/ESD S 6.1 EOS/ESD Association
Standard for the Protection of Electrostatic
Discharge Susceptible Items - Grounding -
Recommended Practice
1
ANSI/ESD S 7.1 ESD Association Standard Test
Method for the Protection of Electrostatic Discharge
Susceptible Items - Resistive Characterization of
Materials - Floor Materials
1
EOS/ESD S 8.1 EOS/ESD Association Standard for
the Protection of Electrostatic Discharge Susceptible
Items - Symbols - ESD Awareness
1
ESD S 9.1 ESD Association Standard Test Method
for the Protection of Electrostatic Discharge
Susceptible Items - Footwear - Resistive
Characterization
1
ESD DSP 10.1 ESD Association Draft Standard for
Protection of Electrostatic Discharge Susceptible
Items
– Automated Handling
ANSI/EOS/ESD S 11.11 EOS/ESD Association
Standard for the Protection of Electrostatic
Discharge Susceptible Items - Surface Resistance
Measurement of Static Dissipative Planar Materials
1