Power Level
1
2
3
4
5
6
7
8
9
Default working timer (hour)
8
8
8
4
4
4
2
2
2
Over-temperature protection-
A temperature sensor monitors the temperature inside the ceramic hob. When an excessive
temperature is monitored, the ceramic hob will stop operation automatically.
Residual heat warning-
When the hob has been operating for some time, there will be some residual heat. The letter “H”
appears to warn you to keep away from it.
Auto shutdown-
Another safety feature of the hob is auto shutdown. This occurs whenever you forget to switch
off a cooking zone. The default shutdown times are shown in the table below-
Using the Timer-
You can use the timer in 2 different ways:
• You can use it as a minute minder. In this case, the timer will not turn any cooking zone
off when the set up time is up
• You can set it to turn one cooking zone off after the set time is up
• You can set the timer for up to 99 minutes
Using the timer as a minute minder-
If you are not selecting any cooking zone
1. Make sure the cooktop is turned on. Note: you can use the minute minder even if you’re not
selecting any cooking zones.
2. Touch the “-” or “+” controls of the timer, the minute minder indicator will flash
3. Adjust the timer setting by touching the “-” or “+” controls.
The minute minder indicator will start flashing and will
show in the timer display.
Hint: Touch the “-” or “+” control of the timer once to decrease or increase by 1 minute.
Touch and hold the “-” or “+” control of the timer to decrease or increase by 10 minutes.
If the setting time exceeds 99 minutes, the timer will automatically return to 0 minute.
Summary of Contents for ECH60TC
Page 11: ...Care and cleaning...
