background image

When you have finished cooking-

1. Turn the cooking zone off by scrolling down to “0” or touching “-” and “+” control together

 
2. Turn the whole cooktop off by touching the ON/OFF      control.

3. Beware of hot surfaces
  “H” will show cooking zone is hot to touch. It will disappear when the surface has cooled 
  down to a safe temperature. It can also be used as an energy saving function if you want to 
  heat further pans, use the hotplate that is still hot.
 

Locking the controls

•  You can lock the controls to prevent unintended use(for example children accidentally  
  turning the cooking zones on)
•  When the controls are locked, all the controls except the ON/OFF control are disabled.

To lock the controls-

Touch the key lock control. The timer indicator will show “LO”

To unlock the controls-
1. Make sure the ceramic hob is turned on
2. Touch and hold the key lock control for a while
3. You can now start using your ceramic hob

When the hob is in the lock mode, all the controls are disabled except the ON/OFF, 
you can always turn the ceramic hob off with the ON/OFF control in an emergency, 
but you shall unlock the hob first in the next operation.

Summary of Contents for ECH60TC

















Reviews: