Page 4
Page 5
WARNING!
Before carrying out any operations with the unit,
carefully read this instruction manual and keep it with cure
for future reference. It contains important about the installation,
usage and maintenance of the unit.
SAFETY
G
eneral
I
nstrUctIon
•
The products referred to in this manual conform to the European Community
Directives and are there-fore marked with CE:.
•
The unit is supplied with hazardous network voltage (110/230V~). Leave ser-
vicing to skilled personnel only. Never make any modifications on the unit not
described in this instruction manual, otherwise you will risk an electric shock.
•
Connection must be made to a power supply system fitted with efficient earth
-
ing (Class I appliance ac-cording to standard EN 60598-1 ). It is, moreover,
recommended to protect the supply lines of the units from indirect contact
and/or shorting to earth by using appropriately sized residual current devices.
•
The connection to the main network of electric distribution must be carried out
by a qualified electrical installer. Check that the main frequency and voltage
correspond to those for which the unit is designed as given on the electrical
data label.
•
Never use the fixture under the following conditions:
- in places subject to vibrations or bumps;
- in places with an ambient temperature of over 45° C.
•
Make certain that no inflammable liquids, water or metal objects enter the
fixture.
•
Do not dismantle or modify the fixture.
•
All work must always be carried out by qualified technical personnel. Contact
the nearest sales point for an inspection or contact the manufacturer directly.
•
If the unit is to be put out of operation definitively, take it to a local recycling
plant for a disposal which is not harmful to the environment
.
W
arnInGs
and
InstallatIon
precaUtIons
•
Never let the power cord come into contact with other cables! Handle the power
cord and all connections with the mains with particular caution!
•
Never modify, bend, mechanically strain, put pressure on, pull or heat up the pow-
er cord.
•
Never strain the cable. There must always be sufficient cable going to the device.
Otherwise, the cable will be damaged, which can cause serious damage.
•
Never remove warning or informative labels from the unit.
•
Never use anything to cover the ground contact.
•
Never lift the device holding it by the projector-head, as the mechanics may be
damaged
•
Do not shake the device. Avoid brute force when installing or operating the device.
•
Only operate the device after having checked if the housing is firmly closed and all
screws are tightly fastened.
•
Only operate the device after having familiarized with its functions.
•
Avoid flames and do not put close to flammable liquids or gases.
•
Always allow a free air space of at least 0.8 m around the unit for ventilation.
•
Always disconnect power from the mains, when device is not used or before clean-
ing! Only handle the power cord holding it by the plug. Never pull out the plug by
tugging the power cord.
