STARVILLE Z100M Par 64 LED, User Manual

Page: 34 / 52

1.
Press [MENU] and then | repeatedly until the display shows ‘MAnu’ . Confirm with
[ENTER] .
2.
Use | to select a value between ‘0’ and ‘255’ .
3.
Press [ENTER] to accept the selection.
1.
Press [MENU] and then | repeatedly until the display shows ‘Slnd’ . Confirm with
[ENTER] .
2.
Use | to select the Salve mode (display shows ‘Sl 1’ ).
3. Press [ENTER] to accept the selection.
ð
The device is now working in slave mode, i.e. it will exactly copy the movement of
the controlling master device, correct wiring provided.
To exit slave mode, select ‘Mast’ and confirm with [ENTER] .
This setting is only relevant if the device is not controlled via DMX.
Manual control
Slave mode
Operating
LED PAR
34