When the device and the DMX controller are operational, the DMX indicator in the display
shows that a DMX signal is being received on the input.
When you configure a group of devices in ‘Master / Slave’ mode, the first unit will control the
others. This feature is especially useful to start a show without much programming. Connect
the DMX output of the master unit to the DMX input of the first slave unit. Then connect the
DMX output of the first slave unit to the DMX input of the second slave unit and so on.
DMX indicator
Connections in ‘Master /
Slave‘ mode
Starting up
LED PAR
24
Summary of Contents for Z100M Par 64 LED
