STARVILLE PAR64 CX-3 RGBW, User Manual

Page: 31 / 48

Press the [M] button. Press one of the arrow keys repeatedly until the display shows ‘TEST’ .
Press the [OK] button. Press one of the arrow keys repeatedly until the display shows ‘RED’ ,
‘GREE’ , ‘BLUE’ , ‘WHIT’ or ‘STRO’ . Press the [OK] button. Now you can adjust the brightness of
the red, green, blue or white LEDs in a range from 0 to 255, or select the flash rate in a range
from 0 to 24.
This operating mode can also be used to create constant or flashing light mixed from the four
LED colours without using a DMX controller.
When the display shows the desired value, press the
[OK] button to confirm the selection and
then [M] to return to the higher menu level. To return to the higher menu level without
changes, press the [M] button.
Press the [M] button. Press one of the arrow keys repeatedly until the display shows ‘FADE’ .
Press the [OK] button. Now you can set the fade speed of the preprogrammed automatic
shows. Use the arrow keys to select a value between 1 and 7 (the display shows ‘F-01’ … ‘F-07’ ).
This setting is only relevant if the device is not controlled via DMX. When the display shows the
desired value, press the [OK] button to confirm the selection and to return to the main menu.
To return to the main menu without changes, press the [M] button.
Manual test
Fade speed
Operation
PAR64 CX-3 RGBW
31