STARVILLE PAR64 CX-3 RGBW, User Manual

Page: 30 / 48

Press the [M] button. Press one of the arrow keys repeatedly until the display shows ‘SET’ .
Press the [OK] button. Press one of the arrow keys repeatedly until the display shows ‘SPEE’ .
Press the [OK] button. Now you can set the programme speed for the preprogrammed auto‐
matic shows. Use the arrow keys to select a value between 1 and 255 (the display shows ‘T001’
… ‘T255’ ).
This setting is only relevant if the device is not controlled via DMX. When the display shows the
desired value, press the [OK] button to confirm the selection and then [M] to return to the
higher menu level. To return to the higher menu level without changes, press the [M] button.
Press the [M] button. Press one of the arrow keys repeatedly until the display shows ‘SET’ .
Press the [OK] button. Press one of the arrow keys repeatedly until the display shows ‘MIC’ .
Press the [OK] button. Now you can adjust the sensitivity of the built-in microphone for the
sound-control. Use the arrow keys to select ‘OFF’ (microphone off) or a value between 1 and
30 (the display shows ‘M-01’ … ‘M-30’ ).
This setting is only relevant if the device is not controlled via DMX. When the display shows the
desired value, press the [OK] button to confirm the selection and then [M] to return to the
higher menu level. To return to the higher menu level without changes, press the [M] button.
Programme speed
Microphone sensitivity
Operation
LED PAR
30