STARVILLE LED Flood Panel 150, User Manual

Page: 31 / 52

Automatic operation can only be activated when the unit is operating in stand alone mode or
as master in a master / slave combination. This setting is only relevant if the device is not con‐
trolled via DMX.
Press
[Mode] repeatedly until the display shows ‘Auto’ . All available programmes are played in
an endless loop, playback starts automatically.
Press
[Setup ] to set the programme progress speed. The display shows ‘SP.xx’ . With [Up] and
[Down] you can now select a value between ‘SP.01’ (slow) and ‘SP.FL’ (fast).
To set the flash frequency for the strobe effect, press again [Setup] . The display shows ‘FSxx’ .
With [Up] and [Down] you can now select a value between ‘SPFS00’ (slow) and ‘FS99’ (fast).
To adjust the fade function, press again [Setup] . The display shows ‘Fdxx’ . With [Up] and
[Down] you can now select a value between ‘Fd00’ (slow fading) and ‘Fd99’ (fast fading).
This setting is only relevant if the device is working as Slave in a Master / Slave configuration
and is not controlled via DMX.
Press
[Mode] repeatedly until the display shows ‘SLAv’ .
Operating mode ‘Auto’
Operating mode ‘Slave’
Operating
LED Flood Panel 150
31