STARVILLE LED Flood Panel 150, User Manual

Page: 30 / 52

Value Colour setting
‘6.–rb’ Red + blue
‘7.rgb’ Red + green + blue
‘8.00F’ No function
Press again [Setup ] to set the brightness of the colours and the flash frequency for the strobe
effect. Depending on the mode, the display shows one of the following values: ‘rxxx’ , ‘gxxx’ ,
‘bxxx’ or ‘FSxx’ . With [Up] and [Down] you can now select a value between ‘SPFS00’ (slow) and
‘FS99’ (fast).
Settings for programmes 02 to 10:
After colour selection, press
[Setup ] to set the programme progress speed. The display shows
‘SP.xx’ . With [Up] and [Down] you can now select a value between ‘SP.01’ (slow) and ‘SP.99’
(fast) as well as ‘SP.FL’ (strobe effect).
To set the flash frequency for the strobe effect, press again [Setup] . The display shows ‘FSxx’ .
With [Up] and [Down] you can now select a value between ‘SPFS00’ (slow) and ‘FS99’ (fast).
Operating
LED floodlight
30