STAIRVILLE • DJ-X 16 DMX CONTROLLER
6
www.thomann.de
15. STEP
button
Press to increase the right two digits by
one. Pressing this button for more than one
second increases the digits quickly from
present counter till the maximum and then
increases from the minimum cyclically. In
chase mode, press this button to execute
the pattern by one step. Pressing for more
than one second allows to execute the
pattern by ten steps per second.
SHIFT + CROSS SETUP button:
Pressing SHIFT + CROSS SETUP together
sets ENABLE or DISABLE for CROSS
mode. If CROSS OFF indicator is lit, press
the CROSS button to enter or leave CROSS
mode.
16. STEP
button
Press to decrease the right two digits by
one. Pressing this button for more than one
second decreases the digits quickly from
present counter till the minimum and then
decreases from the maximum cyclically. In
chase mode, press this button to execute
the pattern by one step. Pressing for more
than one second allows to execute the
pattern by ten steps per second.
SHIFT + BLIND button:
Pressing SHIFT + BLIND together sets
ENABLE or DISABLE for BLIND mode.
When BLIND mode is active, the ENABLE
indicator is it.
17. ADD/KILL button
Press to select ADD or KILL mode. In KILL
mode the indicator near this button is lit. In
ADD mode, the FLASH button levels are
isolated from other levels. In KILL mode and
when the FLASH button levels are turned
on, the other levels are set to zero.
18. PROGRAM button
Press this button for more than one second
to enter PROGRAM mode. The indicator
close to this button is lit, now 30 variable
patterns (1-30) are ready to be programmed,
each containing a maximum of 99 steps.
Press this button to store your setting as one
step. The LCD shows the next step to be
programmed.