STAIRVILLE • DJ-X 16 DMX CONTROLLER
www.thomann.de
11
Operating instructions
You may only connect the device to a properly wired and earthed
mains power wall outlet, after all connections have been established.
The wall outlet must provide the correct mains voltage as stated in
this manual. You may run the DJ-X 16 only using the mains adaptor
provided.
1. RUN PATTERN
A. Press the appropriate function button(s) to select the desired
chasing mode from AUTO, MANUAL AUDIO or TAP SYNC. The
LCD shows the pattern and the step.
B. Press PATTERN
or PATTERN
to select the desired pattern
from 30 built–in patterns (31-60) and 30 variable patterns (1-30).
If the right two digits show 00, the pattern is blank or had been
deleted.
2. FULL ON button
Press this button down, channel 1 to channel 8 are full on and not
controlled by STAND BY.
3. STEP
button
In CHASE mode, press to execute the pattern by one step. Pressing
for more than one second would execute the pattern by 10 steps per
second.
4. PATTERN
button
In CHASE mode, press to select pattern by plus one. Pressing for
more than one second would increase the pattern quickly till the
maximum and then increase from 01.
5. CONTROL OUTPUT cable
Connect to the FOOT CONTROL located on the rear of DJ-X 16
PIN FUNCTION
1 STEP
2 PATTERN
3 STAND BY
4 FULL ON
5 COMMON