Page 10
9.
Using a 13mm socket, secure the
console mount (020-7924) to the
handrail weldment using four (4) pieces
of the M8 x 20mm hex head screws
(110-4076)
TORQUE TO 15-20 lb-ft /20-27 Nm.
Fig. 13
10.
Use a #2 phillips screwdriver to loosen
the left-side screw on the front shroud
cover then secure the left-side corner
shroud (740-9405-XX) to the frame
using one (1) piece of the M5 x 18mm
screw (110-4077). Once the shroud
is secure, re-tighten the front shroud
screw. Repeat this step for the right-
side corner shroud (740-9406-XX).
Loosen
Fig. 14
11.
Use a #2 phillips screwdriver to secure
the motor shroud (740-9404-XX) to the
frame using four (4) pieces of the M5 x
18mm screws.
Fig. 15
