Quick-Start Guide
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.
Manual Revision: June 19, 2019 3:38 PM
Product Diagram (VID2VGATV3)
Front and Side Profile
Rear and Side Profile
Component
Function
1
Video Input Selection Switch
• Select the Source Device Video Signal
2
VGA Output Port
• Connect a VGA Video Display Device
3
Resolution Selection Button
• Select the Output Resolution
4
Power Port
• Connect a Power Source
5
Composite Video Input Port
• Connect a Composite Video Source Device
6
S-Video Input Port
• Connect an S-Video Source Device
Composite and S-Video to VGA Video Converter
Requirements
For the latest requirements, please visit
.
• Composite Video or S-Video Source Device x 1
• Composite Video or S-Video Cable x 1
• VGA Video Display Device x 1
• VGA Cable x 1
• USB Power Source x 1
Installation and Operation
1. Ensure all of your
Devices
are powered off.
2. Determine if you are using a
Composite
or
S-Video Source Device
. Toggle the
Video Input Selection Switch
to match your
Source Device
video signal.
3. Connect a
Composite Video Cable
to the
Composite Video Input Port
.
Or
Connect an
S-Video Cable
to the
S-Video Input Port
.
4. Connect the other end of the
Composite Video Cable
to the
Composite Video
Source Device
.
Or
Connect the other end of the
S-Video Cable
to the
S-Video Source Device
.
5. Connect a
VGA Cable
to the
VGA Output Port
on the
Video Converter
.
6. Connect the other end of the
VGA Cable
to the
VGA Video Source Device
.
7. Connect the
USB-A to USB Mini Cable
to an available
USB
Power Source
and to
the
Power Port
.
8. Select the output resolution by pressing the
Resolution Selection Button
until the
desired resolution is met. Each time you press the
Resolution Selection Button
the
new resolution settings will appear on the
On Screen Display (OSD)
in the upper
right-hand corner of the screen.
5
6
4
3
2
1
