StarTech.com USB511WB, Instruction Manual

Page: 8 / 19

6
(More Settings, continued)
Parameter Description
Enable WEP
Check the Enable WEP box and click WEP More... to set
up your encryption settings. See “WEP Key Settings” on
page 7 for more details.
Profile Name
Enter a profile name to save your settings, or enter the
profile name whose settings you want to load.
Load Profile Settings
Loads the profile whose name you entered in the Profile
Name box. (For example, to open the settings file named
“Test”, type Test in the Profile name field and click Load
Profile Settings.) The new settings will be active
immediately.
Write Current Settings to
Writes the current setting values to a file with the name
Profile
you entered in the profile box. (For example, to save
your current settings as “Test”, enter Test in the Profile
Name field and click Write Current Settings to Profile.)
Make sure you record the name of the profile.
Load Factory Default
Restores the settings to the factory defaults. The default
values are:
Channel: 6
Tx Rate: Auto
SSID: Any
Network Type: Infrastructure
Advanced Setting
Allows you to configure the adapter’s advanced
settings, including power save mode and RTS/CTS
threshold. See “Advanced Settings” on page 8 for more
details.
Information
Displays the driver version, firmware version, and MAC
address of the adapter.