Instruction Manual
8
Duplicator (Copy) Mode
Use the <UP> and <DOWN> arrows on the duplicator dock to select the Copy HDD mode and
press the ENT button to activate. The LCD screen will display transfer rates, progress percentage,
amount of data copied and a countdown timer.
NOTE:
As the duplicator dock creates a 1:1 copy, the Destination disk must be of equal or greater
capacity than the Source disk.
RAID Mode
Use the <UP> and <DOWN> arrows to navigate to the Setup Mode and press the ENT button.
Navigate to the “Change RAID Mode” option and press ENT.
NOTE:
Changing the RAID mode may result in data loss, so make sure all important data is
backed up, before attempting to change the RAID mode.
