Instruction Manual
6
Compare HDD
• Compares the sectors on the Source disk to the Destination disk. Used to ensure that the
Copy operation was successful.
Pre-scan
• Scans the Source disk for bad sectors/blocks and reports the errors.
Rescan Bus
• Rescans the hard drive connectors on the duplicator dock to detect new/swapped drives.
Source Size
• Displays the total storage capacity of the Source disk.
Setup
System information and settings
• DMA Mode
• Switch between different DMA modes, for better compatibility across different drives. Will
affect maximum data transfer rates.
Copy Size
• Specify the percentage of the source drive that should be copied.
Startup Menu
• Sets the first item that should be selected from the main menu on startup.
Auto Compare
• Automatically runs the Compare HDD function after copying. OFF by default.
Copy with Detect
• Automatically rescans the bus before beginning Copy operation. OFF by default.
Button Sound
• Turn audio feedback (beeping) ON/OFF.
Device Info
• Lists disk information about the Source/Destination disks.
System Info
• Lists information about the duplicator, such as firmware version.
USB RAID Mode
• Set the RAID mode for the attached drives when connected to a computer via USB.
Switch between USB and Duplicator modes.
